EAF SUBMERCIBLE SEWAGE/WASTE WATER PUMP
It takes a tough submersible to handle a tough job
Feature:
· Equiped with weatherproof and water proof cable .Wiring and core wire are impregnated with EPOXY .Not only avoid the moist going in to the motor ,but also leakage- proof and moisture proof.
· All series motor are equipped with dry motor or 3- phase and 2 poles or 4 poles, coil of class F Isolation. It is the character of over- heat resistance and perfect isolation. Enclosure IP68 grade of protection.
· The material silicon carbide has the character if mud- resistant and excellent lubrication system and its good long time running. The dual enclose structure has a diaphragm; and its preventing strongly from leaking.
· Pump is equipped by the motor overload protector and will shut itself off automatically to prevent from over heating whenever its voltage drop, impeller plugged, the draining line is below the pump’s water mark and other unusual condition.
· Pump is coated with thick EPOXY. It is better corrosion-resisting than common paint; prevent the surface upon from rusting.
· Pump is equipped with the motor overload protector and will shut itself off automatically to prevent overheating whenever its voltage drop. Impeller plugged; the draining line is below the pump water mark and other unusual conditions.
· There are 3 kinds of impellers as the pictures. You can select close semi- open close and non- clogging. Suitable model will help you to do with properly all kind drainage of waste water or sewage.
Application:
· Building waste water treatment system, sewage system plant, community market sanitary sewer.
· Drainage waste water from paper industry, dyeing industry food stuff industry, leather industry and iron and steel industry.
· Fishery, animal husbandry, dairy farm piggery fecal sewage tank and industry water supply. Other sewage or sump treatment system.
Operating Conditions:
· Ambient temperature +0~ +40⁰C
· Liquid temperature: 0+~40⁰C
· Max Depth: 30m.
· Forbid 24 hours continue running or running pumps under lowest running water level.
· Solid Passage 35~80MM.
Specification:
Power (output)
2HP(60HZ);2HP~7.5HP(50HZ).
Motor protection
IP68
Insulation
F
Pole
2P,4P only( 60 HZ)
Voltage
Single Phase 200~220V*60HZ, Three phase 220or380V*60HZ
Discharge
2″- 8″
Max Head
40M
Max Capacity
6950 LPM(417Ms/H)
CosmoStar CY-0906 1" Double diaphragm pump
Designed for high output per cycle, high power and performance.
Ideal for transferring a wide variety of fluids., CY-0906 offers high pumping capacity in a small package. CY-0906 pumps guarantee high endurance and durability.
Features and Benefits
· High Flow rate, up to 175 liters per minute, in a small portable package
· Clean, hands-off fluid handling
· High performance with high mobility
Typical Application
· Drum fluid transfer
· Unloading fluids
· Chemical evacuation
Typical Fluids Handled
· Chemicals
· Contaminated surface water
· Adhesives, varnishes, dispersions, solvents and stains
· Resins, latexes, wood preservative stains, concrete paints and primers
Technical Data
Maximum Fluid Working Pressure |
8 BAR |
Maximum Flow Delivery |
175 LPM |
Maximum pumpable fluid viscosity |
5000 CPS |
Maximum Air Consumption |
1600 LPM |
Maximum suction lift |
8.3 m |
Maximum size pumpable solids |
3.0 mm |
Air pressure operating range |
2 - 8 BAR |
Air Inlet Size |
1/2 npt (f) |
Fluid Outlet Size |
1 npt (f) |
Fluid Inlet Size |
1 npt (f) |
Weight |
13.5kg(Aluminum) 26 kg(stainless) |
EA Submersible Sump Pumps
It takes a tough Submersible Pumps to handle a tough job
FEATURE:
· Dual mechanical seal to ensure the best seal effect.
· Auto- cut motor protector to avoid motor burnout due to abnormal conditions.
· Light weight compact easy installation and dismantle.
· Motor housing, screws, bottom filter is made of stainless steel to ease corrosion of sump.
· Auto float switch is optional.
APPLICATIONS:
· Building waste water treatment system, sewage treatment plant, community market.
· Drainage waste water from pond and farm.
· Light duty, basement drainage, rain water and effluent and accumulated water drainage
Operating Conditions:
· Ambient temperature +0~ +40⁰C
· Liquid temperature: 0+~40⁰C
· Max Depth: 30m.
· Forbid 24 hours continue running or running pumps under lowest running water level.
· Solid Passage: Max.6mm
Specification:
Power (output) | 2HP(60HZ);2HP~7.5HP(50HZ). |
Motor protection | IP68 |
Insulation | F |
Pole | 2P |
Voltage |
Single Phase 110 or 220V*60HZ (1/2HP~2HP), Three phase 220 or 380V*60HZ |
Mechanical seal |
Dual type; CA/CE material |
Discharge | 1 1/2″- 4″ |
Max Head | 29M |
Max Capacity | 1100 LPM(66Ms/H) |
CY-0802-50G Compact 6" 24:1
Air-operated pump for high viscosity fluid
Cosmostar CY-0802 provide flow rate up to 2 liter per minute (0.53 gpm) and operating pressures up to 200 bars.
Features and Benefits
· High output per cycle; reduced wearing for longer life and lower repair costs
· Large internal porting for maximum flow
· Additional Air-Powered Ram is available for improving performance
Typical Applications
· Handling heavy-to-inflowing fluids without having to inject additional viscosity reducer fluids.
· Dispensing silicone, latex or acrylic sealants
· Dispensing greases and other lubricants
Typical fluid handled
· Sealants
· Adhesives
· Inks
· Plastics
· Lubricants
Technical Data
Air motor diameter |
6 in (COMPACT) |
Pressure ratio |
24:1 |
Maximum Fluid Working Pressure |
2880 PSI (200 Bar) |
Maximum Air Input Pressure |
120 PSI (8.4 Bar) |
Maximum volume flow rates |
2 LPM |
Air inlet size |
1/2 npt(f) |
Fluid outlet size |
1 npt(f) |
Weight |
95 kg |